Tennessee Land Surveyor Stamp
Get your Tennessee Land Surveyor stamp digitally. Legal digital seals accepted by the Tennessee State Board of Architectural and Engineering Examiners.
Yes, Tennessee accepts digital Land Surveyor stamps. The Tennessee State Board of Architectural and Engineering Examiners permits electronically signed and sealed documents when properly authenticated with a digital certificate.
Looking for the general requirements? See the Tennessee professional engineer stamp guide, or verify a license with the Tennessee PE license lookup.
Tennessee Land Surveyor Stamp Requirements
Official seal requirements for Land Surveyors in Tennessee are governed by the Tennessee State Board of Architectural and Engineering Examiners. Always confirm current graphic specifications and digital seal acceptance rules directly with the board before sealing documents.
Looking for a licensed Land Surveyor in Tennessee? Browse the Tennessee Land Surveyor directory →
Are digital Land Surveyor stamps legal in Tennessee?
Tennessee allows licensed professionals to digitally seal documents using a cryptographically authenticated digital signature. The Tennessee State Board of Architectural and Engineering Examiners requires that digital signatures be unique to the licensee, independently verifiable, and linked to the sealed document so that any later alteration invalidates the signature.
The Short Version
Surveyors in Tennessee can legally seal documents with a digital seal issued to their active license. The Tennessee State Board of Architectural and Engineering Examiners accepts digital seals under the federal ESIGN Act and Tennessee’s Uniform Electronic Transactions Act. EngineeringID provides a cryptographically signed, verifiable Land Surveyor seal that matches the elements required by the board and works on any PDF workflow.
Tips & Tricks
- Track your 24 PDH per 2 years as you go — board portals rarely send reminders before the renewal deadline.
- Keep your sealed project records for at least 7 years — the board can request them during an audit or complaint.
At a Glance
License Eligibility
To seal documents in Tennessee, you must hold an active Land Surveyor license issued by the Tennessee State Board of Architectural and Engineering Examiners.
License eligibility:
- Active, current Land Surveyor license with the Tennessee State Board of Architectural and Engineering Examiners
- No restrictions, suspensions, or disciplinary actions on the license
- Continuing education: Tennessee requires 24 PDH per 2 years to keep the license current
- Government-issued identification that matches the license record
Tennessee licensure requirements: ABET-accredited engineering degree, 4 years experience, FE and PE exams.
Your Land Surveyor license already represents your qualification to seal documents. No additional examinations or certifications are required beyond your initial licensure and any mandatory CE required by Tennessee.
Verify your current license status on the official Tennessee State Board of Architectural and Engineering Examiners website: https://www.tn.gov/commerce/regboards/ae.html
Continuing Education
Tennessee requires 24 PDH per 2 years of continuing education for Land Surveyors. Complete it before your renewal date — the board verifies CE at renewal and generally will not accept credits earned for a lapsed cycle.
- Keep certificates of completion; Tennessee can audit your CE records after renewal.
- Courses must usually relate to your area of practice — confirm provider approval first.
- Carrying CE over from a previous cycle is typically not allowed.
Your digital seal remains valid as long as the license stays active, so completing CE on time keeps both your license and your sealing privileges uninterrupted.
Seal Format & Elements
The Tennessee State Board of Architectural and Engineering Examiners publishes specific rules for what a Land Surveyor seal must contain. When you seal a document you take responsible charge of it — you certify that the work was prepared by you or under your direct supervision and that it conforms to the applicable codes and standards. EngineeringID generates seals that match the board’s format requirements, but it is your responsibility as the sealing professional to confirm compliance for your specific document type.
Required elements for a Tennessee Land Surveyor seal:
- Full legal name
- License number
- Professional Engineer
- State of Tennessee
Tennessee seal format: Design: Circular seal · Size: 1.5 to 2 inches
Documents that commonly require a sealed Land Surveyor submission in Tennessee:
- Construction drawings and specifications
- Structural, mechanical, electrical, and plumbing (MEP) designs
- Engineering reports and feasibility studies
- Permit applications submitted to Tennessee building departments
- Any document where a licensed professional takes responsibility for technical content
The Application Process
-
1
Create your account
Sign up with your work email and provide your full legal name, phone number, and profession.
-
2
Enter your license information
Submit your Land Surveyor license number and select Tennessee. We verify it directly with the board; optionally upload your wallet card for faster review.
-
3
Verification (1–3 business days)
We confirm with the Tennessee board that your license is active and unrestricted, then email you when it's done.
-
4
Start sealing
Your seal is available immediately — apply it in the web app or your existing PDF workflow.
Keeping Your Seal Valid
Your seal remains valid for exactly as long as your underlying Tennessee license is active and in good standing. When you renew your license with the state board, your seal is automatically renewed with no action required on your part.
License renewal basics:
- Renewal period: typically every 2 years for most Surveyor licenses
- CE requirements: Tennessee requires 24 PDH per 2 years — complete it before each renewal
- Fees: paid directly to the Tennessee board
- Submission: through the board’s online portal or by mail
If your license expires: Your seal becomes invalid for new documents. Previously sealed documents keep their seal as a historical record, but verification will show the license is no longer active at the current date. Renew and your seal reactivates automatically.
If your license is suspended or revoked: Your seal is invalid immediately for new work. Historical seals remain verifiable but are clearly flagged. Reinstate the license through the board’s process to restore sealing privileges.
Best practice: Set a calendar reminder 60 days before your license expires. Keep your EngineeringID email address current so renewal notifications reach you.
Comparing Your Options
Both ink stamps and digital seals are legally valid for professional sealing. The difference is how authenticity is proved and how easily a seal can be misused.
Ink stamp:
- Authenticity depends on a visual impression and handwritten signature
- Easy to photocopy, harder to detect forgery
- No audit trail of who applied the stamp or when
- Must be physically present to seal a document
- Replacing a lost or stolen stamp is time-consuming and expensive
Digital seal:
- Authenticity is guaranteed by a cryptographic signature bound to the document
- Any modification after sealing is immediately detectable
- Every seal is timestamped and logged
- Works from any device, anywhere
- If a device is compromised, the seal is revoked from your account immediately
For most modern workflows - electronic permit submissions, email delivery, cloud collaboration - a digital seal is the more defensible option.
Cost Breakdown
Digital professional seals through EngineeringID are priced for individual practitioners and firms. You pay for the sealing service itself - Tennessee licensing-board fees are separate and paid directly to the board at renewal.
What’s included in your EngineeringID subscription:
- Unlimited digital seals on your active licenses
- Public verification pages for every sealed document
- Tamper-evident cryptographic signatures
- A complete audit trail of every seal you apply
- Access to your seal from any device
What’s not charged:
- Per-document seal fees
- Per-recipient verification fees
- Storage fees for sealed documents
Costs paid to Tennessee:
- License renewal fees (paid directly to the state board, typically every 2 years)
- Continuing-education course fees (paid to CE providers)
Verified Land Surveyors in Tennessee
Browse and verify licensed professionals across Tennessee in our public directory.
Tennessee Land Surveyor Stamp FAQ
Acceptance of digital Land Surveyor stamps varies by state and by profession. Confirm with the Tennessee State Board of Architectural and Engineering Examiners that Land Surveyor digital seals are accepted for the documents you intend to seal in Tennessee.
To obtain a Tennessee Land Surveyor stamp, you must first be licensed by the Tennessee State Board of Architectural and Engineering Examiners. Requirements include: ABET-accredited engineering degree, 4 years experience, FE and PE exams. Once licensed, you can create your digital stamp through Credo.
Tennessee Land Surveyor licensing requires: ABET-accredited engineering degree, 4 years experience, FE and PE exams. Contact the Tennessee State Board of Architectural and Engineering Examiners at (615) 741-3221 for specific requirements.
Digital Land Surveyor stamps through EngineeringID start at $19/month with unlimited seals. This is more cost-effective than traditional rubber stamps which can cost $50-150 each and require physical handling.
Tennessee requires 24 PDH per 2 years for Land Surveyor license renewal. EngineeringID helps you track your PDH credits alongside your sealing activity.
Yes, most Tennessee regions accept digitally stamped and signed documents for permit submissions. Digital stamps include verification features that traditional stamps lack.
Browse Tennessee licensed Land Surveyors at https://engineeringid.com/directory/land-surveyor/tennessee, or verify directly with Tennessee State Board of Architectural and Engineering Examiners at https://www.tn.gov/commerce/regboards/ae.html.
Documents with incomplete or non-compliant stamps are typically rejected by reviewing authorities and permit offices. The licensed professional bears legal responsibility for any documents they seal — missing required elements can also trigger disciplinary action from Tennessee State Board of Architectural and Engineering Examiners.
Tennessee typically requires Land Surveyor stamps on: Boundary surveys, Topographic mapping, ALTA/NSPS surveys, Construction staking, Subdivision plats, GPS control surveys, Right-of-way surveys. Professional Land Surveyors (PLS) must be licensed to perform boundary surveys and certify property descriptions.
Tennessee participates in comity/reciprocity agreements with other states. Licensed professionals from other states may apply for a Tennessee license through the Tennessee State Board of Architectural and Engineering Examiners with streamlined requirements.
A Tennessee Land Surveyor stamp must be 1.5 to 2 inches in diameter and include: Full legal name, License number, "Professional Engineer", "State of Tennessee". Per Tenn. Code §§ 62-2-306, 62-18-119. Digital stamps through EngineeringID automatically include all required elements plus tamper-evident security features.
A Tennessee professional stamp must be 1.5 to 2 inches in diameter. EngineeringID renders your stamp at the exact required size for print and PDF output, so it stays legible at any zoom level.
The stamp itself does not expire, but it is only valid while your Tennessee license is active and unrestricted. Continuing education for renewal in Tennessee: 24 PDH per 2 years. Regenerate your PLS stamp whenever your license number or legal name changes.
Official Resources for Tennessee
Official licensing authority for Tennessee. Verify license status, renewal windows, and submittal requirements.
The federal Electronic Signatures in Global and National Commerce Act establishes the legal validity of electronic signatures and seals.
Tennessee's state-level UETA statute recognizes electronic records and signatures as legally equivalent to their paper counterparts.
Contact number for the Tennessee board: (615) 741-3221
Regulations change. Always confirm current requirements with the Tennessee State Board of Architectural and Engineering Examiners before relying on any specific rule described on this page. Laws and board rules are the controlling authority; this guide is intended as a plain-language summary.
Other Disciplines We Support
Many firms have licensed professionals across multiple disciplines. If your team includes any of the following Tennessee licensees in addition to Land Surveyors, they can all manage their seals from one EngineeringID organization:
- Aerospace Engineer (Aerospace)
- Agricultural Engineer (Agricultural)
- Architect (Architect)
- Biomedical Engineer (Biomedical)
- Chemical Engineer (Chemical)
- Civil Engineer (Civil)
Land Surveyor Stamps in Other States
Get Your Tennessee Land Surveyor Stamp Today
Trusted by professionals across the US for secure, compliant document sealing.