Georgia Professional Engineer Stamp

Licensing Requirements

To seal documents in Georgia, you must hold an active Professional Engineer license issued by the Georgia Board of Professional Engineers and Land Surveyors.

License eligibility:

• Active, current Professional Engineer license with the Georgia Board of Professional Engineers and Land Surveyors
• No restrictions, suspensions, or disciplinary actions on the license
• Continuing education: Georgia requires 30 PDH per 2 years to keep the license current
• Government-issued identification that matches the license record

Georgia licensure requirements: ABET-accredited engineering degree, 4 years experience, FE and PE exams.

Your Professional Engineer license already represents your qualification to seal documents. No additional examinations or certifications are required beyond your initial licensure and any mandatory CE required by Georgia.

Verify your current license status on the official Georgia Board of Professional Engineers and Land Surveyors website: https://sos.ga.gov/PLB/acrobat/PLB_PELS_PELS_Laws_and_Rules.pdf

Continuing Education

Georgia requires 30 PDH per 2 years of continuing education for Professional Engineers. Complete it before your renewal date — the board verifies CE at renewal and generally will not accept credits earned for a lapsed cycle.

• Keep certificates of completion; Georgia can audit your CE records after renewal.
• Courses must usually relate to your area of practice — confirm provider approval first.
• Carrying CE over from a previous cycle is typically not allowed.

Your digital seal remains valid as long as the license stays active, so completing CE on time keeps both your license and your sealing privileges uninterrupted.

Digital Sealing Explained

Georgia accepts digital seals from a Professional Engineer. A digital seal serves the same legal purpose as an ink stamp but proves authorship cryptographically, so it cannot be forged or silently altered.

What a digital Professional Engineer seal includes

• The professional’s name, license number, and state of licensure
• A cryptographic signature bound to the document content
• A tamper-evident record of when the seal was applied
• A verification URL so any recipient can confirm authenticity

Advantages over ink stamps

• Instant verification - recipients confirm authenticity in one click
• Tamper evidence - any edit after sealing invalidates the signature
• Complete audit trail - every application is timestamped and logged
• Remote sealing - apply seals from any location, on any device
• No lost or stolen stamps - seals are tied to your account, not a physical object

What Your Seal Must Show

The Georgia Board of Professional Engineers and Land Surveyors publishes specific rules for what a Professional Engineer seal must contain. When you seal a document you take responsible charge of it — you certify that the work was prepared by you or under your direct supervision and that it conforms to the applicable codes and standards. EngineeringID generates seals that match the board’s format requirements, but it is your responsibility as the sealing professional to confirm compliance for your specific document type.

Required elements for a Georgia Professional Engineer seal:

• Full legal name
• License number
• Professional Engineer
• State of Georgia
• License expiration date

Georgia seal format: Design: Circular seal · Size: 1.5 to 2 inches

Statutory authority: O.C.G.A. § 43-15-22

Documents that commonly require a sealed Professional Engineer submission in Georgia:

• Construction drawings and specifications
• Structural, mechanical, electrical, and plumbing (MEP) designs
• Engineering reports and feasibility studies
• Permit applications submitted to Georgia building departments
• Any document where a licensed professional takes responsibility for technical content

License Renewal

Your seal remains valid for exactly as long as your underlying Georgia license is active and in good standing. When you renew your license with the state board, your seal is automatically renewed with no action required on your part.

License renewal basics:

• Renewal period: typically every 2 years for most Engineer licenses
• CE requirements: Georgia requires 30 PDH per 2 years — complete it before each renewal
• Fees: paid directly to the Georgia board
• Submission: through the board’s online portal or by mail

If your license expires: Your seal becomes invalid for new documents. Previously sealed documents keep their seal as a historical record, but verification will show the license is no longer active at the current date. Renew and your seal reactivates automatically.

If your license is suspended or revoked: Your seal is invalid immediately for new work. Historical seals remain verifiable but are clearly flagged. Reinstate the license through the board’s process to restore sealing privileges.

Best practice: Set a calendar reminder 60 days before your license expires. Keep your EngineeringID email address current so renewal notifications reach you.

Reciprocity & Comity

Many Professional Engineers hold licenses in more than one state. Your EngineeringID account supports every state you’re licensed in - add each license and issue seals that match the appropriate jurisdiction.

Key points for multi-state practice:

• One seal per state. Each sealed document must carry the seal for the state that jurisdiction the work was performed in. Never use a Georgia seal on a document intended for another state.
• Comity and reciprocity. Most states have comity agreements that allow a licensee in good standing in another state to obtain a license by endorsement. You still need the individual state license before sealing there.
• Per-state CE requirements. Each state sets its own CE rules. Track them separately - meeting Georgia’s CE obligation does not automatically satisfy another state’s.

If you expect to work across state lines, apply for additional licenses early. Board processing times vary from 2 weeks to several months.

Industry Requirements

Different industries that accept sealed Professional Engineer documents in Georgia have their own conventions on top of the state board’s rules.

• Building departments and permitting - expect a sealed cover sheet plus sealed sheets for each discipline; many jurisdictions now require digital seals for electronic plan review
• Utility and infrastructure agencies - often require sealed design documents and as-built drawings; some have specific PDF version and font-embedding requirements
• Litigation and expert testimony - require sealed opinions and reports; digital seals are increasingly preferred because the audit trail simplifies authentication during discovery

When in doubt, ask the receiving party which format they prefer. Most Georgia agencies publish submittal guidelines that list accepted seal types.

What It Costs

Digital professional seals through EngineeringID are priced for individual practitioners and firms. You pay for the sealing service itself - Georgia licensing-board fees are separate and paid directly to the board at renewal.

What’s included in your EngineeringID subscription:

• Unlimited digital seals on your active licenses
• Public verification pages for every sealed document
• Tamper-evident cryptographic signatures
• A complete audit trail of every seal you apply
• Access to your seal from any device

What’s not charged:

• Per-document seal fees
• Per-recipient verification fees
• Storage fees for sealed documents

Costs paid to Georgia:

• License renewal fees (paid directly to the state board, typically every 2 years)
• Continuing-education course fees (paid to CE providers)